Mark 35A
Mark 50
Mark 55, 55A
Mark 75, 75A
Mark 75A
1960 Merc 300
1961 Merc 350
1984 - 1989 Merc 35 (2 cyl)
1963 - 1969 Merc 350
1980 - 1983 Merc 40 (2 cyl)
1989 - 1996 Merc 40 (4 cyl)
1960 - 1961 Merc 400
1970 - 1971 Merc 400 (2 cyl)
1972 - 1979 Merc 402
1986 - 1989 Merc 45 (4 cyl)
1962 - 1964 Merc 450 (2 cyl)
1986 - 1990 Merc 50 (3 cyl)
1980 - 1985 Merc 50 (4 cyl)
1965 - 1979 Merc 500
1984 - 1990 Merc 60 (3 cyl)
1972 - 1979 Merc 650 (3 cyl)
1977 - 1983 Merc 70 (3 cyl)
1960 - 1961 Merc 700 (6 cyl)
1960 - 1961 Merc 800 (6 cyl)

1969 Merc 1000SS
1972 - 1977 Merc 1150
1968 - 1969 Merc 1250
1970 - 1971 Merc 1350
1972 Merc 1400
1973 - 1977 Merc 1500
1978 Merc 1500XS
1968 - 1977 Merc 200
1977 - 1981 Merc 200,20
1966 - 1969 Merc 350
1970 - 1971 Merc 400 (2 cyl)
1972 - 1977 Merc 402
1968 - 1975 Merc 500
1972 - 1975 Merc 650 (3 cyl)
1968 - 1971 Merc 650 (4 cyl)
1969 - 1972 Merc 800,80 (4 cyl)
1973 - 1977 Merc 850 (4 cyl)

Gear Lube Drain screw with gasket for most Mercury lower units.  (Also used as vent screw in 1963 and newer 35HP and larger non-racing gear cases.)

Was 10-79953T2

This is used as both drain & vent on 1974 & prior models.  1975-76 use this for vent screw and 22-67892A06 magnetic drain screw.

Merc 350, 450, 500 (SELF-LOCKING)

Mercury Premium Gear Lube for use in gear housings of all Mercury, Mariner, and Force outboards. 8 oz.

Fits Mercury 18, 20, 25,35, 40, 400, 402, 45, 50, 500, 55, 60, 650,70

Merc 350, 500

Drive shaft seal for Merc 1000 BP, 1250BP

Prop shaft seal for Merc 400, 402, 500, 650

This is the top crankshaft seal for models K, KB & KD models, KE3, KE4, KE4A, KF3, Mark 7

This is the bottom crankshaft seal on the KF-3 for serial # 358552 thru 358612 and 358616 & up.

This is the drive shaft seal for Mark 10, 10A, 15A, 28, 28A, 40H, 55H, Merc 100, 150, 200, 350, 500, 650

This is the prop shaft seal for Mark 75H

Drive shaft seal for Mark 35A, 55, 55A, 58, 58A, 75, 75H, 75A, 78, 78A, Merc 300, 350, 400, 450, 500, 600, 650, 700DR

Prop shaft seal for Mark 35A, 50, 55, 55A, 58, 58A, Merc 300, 350, 400, 450, 500

Water pump cover seal for Mark 75, 75A, 78, 78A, Merc 600

(Replaces 47-20268 & 47-65959)

The following gearshift models:
 all 2 cyl. 35 & 40 HP thru 1989
 all 3 cyl. 50 - 65 HP thru 1990
 all 3 cyl. 70 HP thru 1983
 all 4 cyl 35 - 50 HP

Fits Merc 35, 40, 402, 45, 50, 500, 60, 650, 70

Aftermarket Water Pump Impeller Kit (includes impeller, gaskets, wear plate, etc.) fits all 2 cyl. 35 & 40 HP thru 1989, all 3 cyl. 50 - 65 HP thru 1990, all 3 cyl. 70 HP thru 1983, all 4 cyl 50 HP 1963 and newer.

Water pump repair kit
Fits the following motors:
35HP (2 cyl) serial# 6445653 and up
400 (40HP) serial# 2874704-3336257
402 (40HP) and 40HP serial# 3336258-G053313
45HP (4 cyl) serial# 5531630 and up
500 (50HP) and 50HP (4 cyl) serial# 2858814 and up
50HP and 60HP (3 cyl) serial# 6428681-D000749
70HP (3 cyl) serial# 4977157-6428680

Mercury Water Pump Kit includes pump housing and fits all 2 cyl. 35 & 40 HP thru 1989, all 3 cyl. 50 - 65 HP thru 1990, all 3 cyl. 70 HP thru 1983, all 4 cyl 50 HP 1963 and newer.

Fits Merc 650 (3 cyl), 70 (3 cyl)

Mercruiser
Merc 1000BP
Merc 1250BP
1966 - 1969 Merc 350
1970 - 1971 Merc 400 (2 cyl)
1972 - 1977 Merc 402
1968 - 1975 Merc 500
1976 - 1979 Merc 500,50
1972 - 1976 Merc 650 (3 cyl)
1977 - 1979 Merc 70 (3 cyl)

Lower unit seal kit for 30-70 HP Mercs, 1977-1979.  Also fits many Mariner applications 30-60 HP.

Fits Merc 650, 800, 850