You are here:Home > "Mark" Models > Mark 75A > Lower Unit
Sort By:
Page of 1
O RING O RING

Mark 35A
Mark 50
Mark 55, 55A
Mark 75, 75A
Mark 75A
1960 Merc 300
1961 Merc 350
1984 - 1989 Merc 35 (2 cyl)
1963 - 1969 Merc 350
1980 - 1983 Merc 40 (2 cyl)
1989 - 1996 Merc 40 (4 cyl)
1960 - 1961 Merc 400
1970 - 1971 Merc 400 (2 cyl)
1972 - 1979 Merc 402
1986 - 1989 Merc 45 (4 cyl)
1962 - 1964 Merc 450 (2 cyl)
1986 - 1990 Merc 50 (3 cyl)
1980 - 1985 Merc 50 (4 cyl)
1965 - 1979 Merc 500
1984 - 1990 Merc 60 (3 cyl)
1972 - 1979 Merc 650 (3 cyl)
1977 - 1983 Merc 70 (3 cyl)
1960 - 1961 Merc 700 (6 cyl)
1960 - 1961 Merc 800 (6 cyl)

Our Price: $1.79
WATER PUMP GASKET, LOWER WATER PUMP GASKET, LOWER

Water Pump Gasket, lower.  Used on Mark 75, 75A, 78, 78A, and Merc 600

Our Price: $3.95
WATER PUMP GASKET, UPPER WATER PUMP GASKET, UPPER

Water Pump Gasket, upper.  Used on Mark 75, 75A, 78, 78A, and Merc 600.

Our Price: $4.95
GEARCASE DRAIN SCREW WITH GASKET GEARCASE DRAIN SCREW WITH GASKET

Gear Lube Drain screw with gasket for most Mercury lower units.  (Also used as vent screw in 1963 and newer 35HP and larger non-racing gear cases.)

Was 10-79953T2

This is used as both drain & vent on 1974 & prior models.  1975-76 use this for vent screw and 22-67892A06 magnetic drain screw.

Our Price: $6.99
VENT SCREW KIT VENT SCREW KIT

Gear Case Vent screw with gasket for gear cases of many smaller Mercury Outboards.

Our Price: $8.99
DRIVE/PROP SHAFT SEAL DRIVE/PROP SHAFT SEAL

Drive shaft seal for Merc 800 DR

Prop shaft seal for Mark 75, 75A, 78, 78A, Merc 600

Our Price: $9.25
PROP NUT TAB WASHER PROP NUT TAB WASHER

Mark 75, 75A, 78, 78A, Merc 600

Our Price: $9.50
GEAR LUBE GEAR LUBE

Gear Grease- 105 Lubriplate replaces original gear grease in all 1, 2, & 4 cyl. Mercurys through 1961. This heavier lube should also be used in non-shift motors of other brands. 10 oz.

Note: Modern 90 weight gear lube is generally unacceptable in these engines.

Our Price: $14.89
DRIVE/PROP SHAFT SEAL & WATER PUMP COVER SEAL DRIVE/PROP SHAFT SEAL & WATER PUMP COVER SEAL

Drive shaft seal for Mark 35A, 55, 55A, 58, 58A, 75, 75H, 75A, 78, 78A, Merc 300, 350, 400, 450, 500, 600, 650, 700DR

Prop shaft seal for Mark 35A, 50, 55, 55A, 58, 58A, Merc 300, 350, 400, 450, 500

Water pump cover seal for Mark 75, 75A, 78, 78A, Merc 600

List Price: $15.70
Our Price: $17.99