Gear Lube Drain screw with gasket for most Mercury lower units.  (Also used as vent screw in 1963 and newer 35HP and larger non-racing gear cases.)

Was 10-79953T2

This is used as both drain & vent on 1974 & prior models.  1975-76 use this for vent screw and 22-67892A06 magnetic drain screw.

Mercury Premium Gear Lube for use in gear housings of all Mercury, Mariner, and Force outboards. 8 oz.

Prop Nut Kit includes a special locking nut and two tab washers.  For use on Mercury/Mariner 30-60 hp. outboard engines.

Fits Merc 400, 402, 500, 650, 650XS

This is the top crankshaft seal for models K, KB & KD models, KE3, KE4, KE4A, KF3, Mark 7

This is the bottom crankshaft seal on the KF-3 for serial # 358552 thru 358612 and 358616 & up.

This is the drive shaft seal for Mark 10, 10A, 15A, 28, 28A, 40H, 55H, Merc 100, 150, 200, 350, 500, 650

This is the prop shaft seal for Mark 75H

Drive shaft seal for Mark 35A, 55, 55A, 58, 58A, 75, 75H, 75A, 78, 78A, Merc 300, 350, 400, 450, 500, 600, 650, 700DR

Prop shaft seal for Mark 35A, 50, 55, 55A, 58, 58A, Merc 300, 350, 400, 450, 500

Water pump cover seal for Mark 75, 75A, 78, 78A, Merc 600

Merc 402, 500, 650

(Replaces 47-20268 & 47-65959)

The following gearshift models:
 all 2 cyl. 35 & 40 HP thru 1989
 all 3 cyl. 50 - 65 HP thru 1990
 all 3 cyl. 70 HP thru 1983
 all 4 cyl 35 - 50 HP

Aftermarket Water Pump Impeller Kit (includes impeller, gaskets, wear plate, etc.) fits all 2 cyl. 35 & 40 HP thru 1989, all 3 cyl. 50 - 65 HP thru 1990, all 3 cyl. 70 HP thru 1983, all 4 cyl 50 HP 1963 and newer.

Water pump repair kit
Fits the following motors:
35HP (2 cyl) serial# 6445653 and up
400 (40HP) serial# 2874704-3336257
402 (40HP) and 40HP serial# 3336258-G053313
45HP (4 cyl) serial# 5531630 and up
500 (50HP) and 50HP (4 cyl) serial# 2858814 and up
50HP and 60HP (3 cyl) serial# 6428681-D000749
70HP (3 cyl) serial# 4977157-6428680

Mercury Water Pump Kit includes pump housing and fits all 2 cyl. 35 & 40 HP thru 1989, all 3 cyl. 50 - 65 HP thru 1990, all 3 cyl. 70 HP thru 1983, all 4 cyl 50 HP 1963 and newer.

Lower unit seal kit for 30-70 HP Mercs, 1977-1979.  Also fits many Mariner applications 30-60 HP.