Top Crankcase seal for Merc 60
Bottom Crankshaft Seal for Merc 60 & 60J

KD4, KD4S, KE3, KE4, KE4A, KF3, Mark 7
This is the bottom crankshaft seal on the KF-3 for motors in the following serial numbers. 358136 thru 358551 and 358613 thru 358615.  If your serial number does not fall within these parameters please see item # 26-79831

Crankcase oil seal for Mark 5, KF5 & KF3

Water cap inlet seal for Mark 6 & 6A

Fits Merc 18, 20 (2 CYL), 25

Bottom Crankshaft Seal - KE7, KF7, KG7, KH7

This information is a general guide. Engine parts lists should always be used to determine which part numbers at what quantity are called for on any particular motor.

BOTTOM CRANKSHAFT SEAL - KF9, KG9

Top crankcase seal for Merc 45, 75, 110

Bottom crankcase seal for Merc 75, 110

Top crankcase seal for Merc 39, 40, 45, 60, 60J, 110
Bottom Crankshaft seal for Merc 39, 40, 110

Merc 200, Merc 25SS

This is the top crankshaft seal for models K, KB & KD models, KE3, KE4, KE4A, KF3, Mark 7

This is the bottom crankshaft seal on the KF-3 for serial # 358552 thru 358612 and 358616 & up.

This is the drive shaft seal for Mark 10, 10A, 15A, 28, 28A, 40H, 55H, Merc 100, 150, 200, 350, 500, 650

This is the prop shaft seal for Mark 75H

Top crankshaft seal for Mark 30, 30H, 35A, 40, 40H, 50, 55, 55A, 55H, 58, 58A, 75, 75A 78, 78A, Merc 300, 350, 400, 402, 450, 500, 600, 650, 850, 900, 950, 1000, 1100, 1150, 1350, 1400, 1500

Botton crankshaft seal for Mark 30, 30H, 35A, 40H, 55, 55A, 55H, 58, 75, 75A, 78A, Merc 300, 350, 400, 402, 450, 500, 600, 650, 850, 900, 950, 1000, 1100, 1150, 1350, 1400, 1500

Picture is for display purposes only.

Top Crankcase Seal -  KE7, KF7, KF9, KG4, KG4H, KG7, KG7H, KG9, KH7, Mark 15, 20

Bottom crankshaft seal for KG4H, KG7H, Mark 10, 10A, 15A, 20H, 28, 28A, Merc 100, 150, 200

Drive shaft seal for KF9, KG9, Mark 40, Merc 650, 900, 950, 1000, 1100, 1150, 1350, 1400, 1500

Water pump cover seal for Merc 650, 700, 800, 850, 900, 950, 1000, 1100, 1150, 1350 (not used on later design pump housings.) 1400, 1500

Water pump housing seal for Merc 650

Merc 40, 45, 75

Mark 75A, 78, 78A, Merc 350, 500, 600, 650, 850, 900, 950, 1000, 1100