Water Pump Gasket, upper.  Fits all Mercury 4 cyl. 65, 80, & 85 HP models, all 6 cyl. engines 1963 thru 1993, and fits MerCruiser I/R/MR/Alpha drives (s/n 2495186-0D469858).

Also fits Merc 110 jet, 140 jet, 175 pro, V115 DFI, V135, V135 DFI, V150 EFI, V15 DFI, V175 EFI, V175 DFI, V200, V200 EFI

Water Pump Gasket, lower. Fits all Mercury 4 cyl. 65, 80, & 85 HP models, all 6 cyl. engines 1963 thru 1993, and fits MerCruiser I/R/MR/Alpha drives (s/n 2495186-0D469858).

(was 27-856081)

6 cyl. engines 1962 to Present All 4 cyl. engines, 65 HP & UP.

Gear Lube Drain screw with gasket for most Mercury lower units.  (Also used as vent screw in 1963 and newer 35HP and larger non-racing gear cases.)

Was 10-79953T2

This is used as both drain & vent on 1974 & prior models.  1975-76 use this for vent screw and 22-67892A06 magnetic drain screw.

Mercury Premium Gear Lube for use in gear housings of all Mercury, Mariner, and Force outboards. 8 oz.

Merc 650, 700, 850, 900, 950, 1000, 1100, 1150, 1350, 1400, 1500

Merc 650, 700, 850, 900, 950, 1000, 1100, 1150, 1250,1350, 1400, 1500, 1750

Top Crankcase Seal -  KE7, KF7, KF9, KG4, KG4H, KG7, KG7H, KG9, KH7, Mark 15, 20

Bottom crankshaft seal for KG4H, KG7H, Mark 10, 10A, 15A, 20H, 28, 28A, Merc 100, 150, 200

Drive shaft seal for KF9, KG9, Mark 40, Merc 650, 900, 950, 1000, 1100, 1150, 1350, 1400, 1500

Water pump cover seal for Merc 650, 700, 800, 850, 900, 950, 1000, 1100, 1150, 1350 (not used on later design pump housings.) 1400, 1500

Water pump housing seal for Merc 650

Fits Merc 1000, 1000SS, 1100, 115, 1150, 1250, 1350, 140, 1400, 1500, 1500XS, 650, 75, 80, 800, 850, 90, 900, 950, V135, V150, V175, V200

(Replaces 47-30221 & 47-65960 & 47-89984)

Fits all 4 cyl. 65, 80, & 85 HP models all 6 cyl. engines with gearshift thru 1993 also fits Merc 800 direct reversing.

Aftermarket Water Pump Impeller Kit (includes impeller, gaskets, wear plate, etc.) fits all Mercury 4 cyl. 65, 80, & 85 HP models, all 6 cyl. engines 1963 thru 1993, and fits MerCruiser I/R/MR/Alpha drives (s/n 2495186-0D469858).

Water pump kit

OEM Mercury Water Pump Kit includes plastic pump housing assembly, impeller, face plate, gaskets, drive key or pin, water tube guide sleeve, orings and gear lube fill & vent screw seals. (Pump base not included) Fits all Mercury/Mariner  4 cyl. 65, 80, & 85 HP models, all 6 cyl. engines 1963 thru 1993 and fits MerCruiser I/R/MR/Alpha drives (s/n 2495186-0D469858).

Lower Unit Resealing Kit includes all seals, gaskets & o-rings. (Does not include gasket & seal for cooling system flush plug) Fits 4 & 6 cyl 65 to 150 HP inline models from 1963-1986