Mark 35A
Mark 50
Mark 55, 55A
Mark 75, 75A
Mark 75A
1960 Merc 300
1961 Merc 350
1984 - 1989 Merc 35 (2 cyl)
1963 - 1969 Merc 350
1980 - 1983 Merc 40 (2 cyl)
1989 - 1996 Merc 40 (4 cyl)
1960 - 1961 Merc 400
1970 - 1971 Merc 400 (2 cyl)
1972 - 1979 Merc 402
1986 - 1989 Merc 45 (4 cyl)
1962 - 1964 Merc 450 (2 cyl)
1986 - 1990 Merc 50 (3 cyl)
1980 - 1985 Merc 50 (4 cyl)
1965 - 1979 Merc 500
1984 - 1990 Merc 60 (3 cyl)
1972 - 1979 Merc 650 (3 cyl)
1977 - 1983 Merc 70 (3 cyl)
1960 - 1961 Merc 700 (6 cyl)
1960 - 1961 Merc 800 (6 cyl)

Gear Lube Drain screw with gasket for most Mercury lower units.  (Also used as vent screw in 1963 and newer 35HP and larger non-racing gear cases.)

Was 10-79953T2

This is used as both drain & vent on 1974 & prior models.  1975-76 use this for vent screw and 22-67892A06 magnetic drain screw.

Water Pump Gasket, upper.  Used on Merc 700 Direct Reversing models.

Water Pump Gasket, lower.  Used on Merc 700 Direct Reversing models.

Mercury Premium Gear Lube for use in gear housings of all Mercury, Mariner, and Force outboards. 8 oz.

Merc 700 & Merc 800 Direct Reversing

Drive shaft seal for Mark 35A, 55, 55A, 58, 58A, 75, 75H, 75A, 78, 78A, Merc 300, 350, 400, 450, 500, 600, 650, 700DR

Prop shaft seal for Mark 35A, 50, 55, 55A, 58, 58A, Merc 300, 350, 400, 450, 500

Water pump cover seal for Mark 75, 75A, 78, 78A, Merc 600

1963 - 1965 Merc 1000
1968 - 1969 Merc 1000SS
1966 - 1967 Merc 1100
1968 - 1969 Merc 1250
1963 - 1969 Merc 650 (4 cyl)
1961 - 1962 Merc 700 (6 cyl)
1963 - 1964 Merc 850 (6 cyl)
1965 Merc 900 (6 cyl)
1966 - 1967 Merc 950 (6 cyl)